Just created new section on right called How to start and Gateway setup describing what hardware you would need to get started with OHS. And later first configuration of gateway.
OHS is open source based burglar alarm and automation platform. It can work as new alarm gateway, or it can replace your old alarm panel. OHS can use any wired 12V sensor, PIR, smoke or reed switch. It has Web interface that is used to set it up. OHS has GSM modem that is able to send SMS or page you. It has radio interface for environmental sensors. OHS is self-contained, it does not need any cloud service, only optional SMTP server for emails, or MQTT server to publish collected sensor data.
Showing posts with label project. Show all posts
Showing posts with label project. Show all posts
Friday, December 16, 2016
Thursday, June 9, 2016
My setup
Remote (door entry) units are connected also by wire cables (RS485 protocol) and there is already short video, how they work.
Saturday, August 23, 2014
The project.
Why I have started the project? Simply because I wanted protect my house from burglars.Some years ago we've started build a house and the idea sparked in me that I can actually create a security and monitoring system my-self. I've been playing with Arduino and Atmega uCPUs and I wanted to use it for some real project. In the house I have put all the wires for PIR sensors, smoke alarms and entry panels. And along with it I've started researching wire and wireless protocols and possibilities. Step by step I've become more and more interested in the idea and the project started.
What it should do? It should replace standard home security alarms, and in future gather statistics from various sensors and do some home automation.
Some of the functions are already there. I have RS485 nodes connected to main board and talking with it over one twisted pair. I have library created that works with the half duplex receiver/transmitter, handles the communication, packets, and is able to detect contention and errors during transmission. Then I have the hardware ready for widely used and reliable RFM12B radio which will be used for cases where wires are not possible or more preferred. There is also Ethernet module working that can serve web pages for communication and configuration.
What is the mission? I must say I'm happy with this project. It is working well and brings me a lot of joy. I went through several version of software, hardware and design and still I'm not discouraged by all the little pitfalls it has brought along. And because I'm reader of hackaday I've decided to enter the TheHackadayPrize and started to post some project news. This just led me into idea that someone else can benefit from my project or better someone can join and add new features or hardware. In the future I will be posting here the project logs, schematic, source code and documentation.
Subscribe to:
Posts (Atom)